Steelway Brickhouse: BS EN 124

INTRODUCTION > Standards BS EN 124
line

kitemark There are instances where market requirement dictates the use of the BS EN 124 standard for specific fabricated steel products.

The BS EN 124 standard divides products into minimum level classifications in accordance with their intended place of installation.

Class F900:	Areas imposing particularly high wheel loads, (aircraft aprons etc.)
Class E600:	Non-carriageway areas imposing high wheel loads, (docksides, airports etc.)
Class D400:	Carriageways, hard shoulders and parking areas for all types of fast moving road vehicles (all carriageway locations restricted by wheel loading only).
Class C250:	Carriageways carrying all classes of fast-moving traffic but within 0.5m of the kerbside/up to 0.2m into the footway (all carriageways restricted to the zones stated and by wheel loadings).
Class B125:	Footway locations and access areas where slow-moving emergency, public service and delivery vans have access and may park (pedestrian precincts, commercial delivery access, refuse collection access, forecourts, paved parking areas).
Class A15:	Access covers capable of withstanding a 1.5 tonnes test load. For use in areas where only pedestrians have access. Note: Where there is any doubt, BS EN 124 specifies that the higher class product MUST be used. If customers have any doubts or queries about the suitability of any Steelway Brickhouse product, they should contact the Steelway Brickhouse Customer Service Unit on: 0121 521 4525.

line